Graffgo water-based anti-graffiti coating

Fight back against graffiti

Graffgo is a highly effective, one pack, permanent coating that will give lasting protection against a graffiti attack without the need for reapplication. The product allows graffiti to be removed easily with soap and water. Graffgo also allows the easy removal of fly posting.

Composition: Clear and pigmented liquid

Application: Brush, roller or airless sprayer. The surface must be clean and dry before application. Soiling and graffiti must be removed. Ensure the coating is applied evenly and not too thinly.  It is recommended to re-paint rendered walls prior to application. Non-darkening primer can be applied to maintain the integrity of the surface colour. Graffgo is touch dry in 3-4 hours and fully cured with 24 hours of application.

Usage:  Graffgo anti-graffiti coating can be used on Masonry, including brick, marble, stone, granite and concrete. Metal surfaces, Wood, Fibreglass, Vinyl, Glass.

Coverage Rate:  Usually 8-10 metres is achieved per litre.

Equipment Care: Clean off equipment with white spirit.

Special notes:  Should not be applied at temperatures below 5 degrees. Remove with soap and water or with a pressure washer at no more than 70 bar. To prevent concrete surfaces darkening and application to very porous surfaces, it is advisable to apply a Concrete Sealer.

Safety Precautions: Please use appropriate PPE when using this product

Trade / DIY benefits

• Multi-Surface compatible.
• Permanent protection
• Tough and resilient
• No reapplication required
• One pack system
• Washes off with soap and water

Trade / DIY applications

• Masonry
• Brick
• Marble
• Stone
• Granite
• concrete
• Metal surfaces
• Wood
• Fibreglass
• Vinyl
• Glass.