A highly effective, one pack, permanent coating that will give lasting protection against a graffiti attack without the need for reapplication. The product allows graffiti to be removed easily with soap and water. Graffgo also allows the easy removal of fly posting.
Trade / DIY benefits
- Multi-Surface compatible.
- Permanent protection
- Tough and resilient
- No reapplication required
- One pack system
- Washes off with soap and water
- Clear and pigmented liquid
Trade / DIY applications
Graffgo anti-graffiti coating can be used on:
- masonry
- brick
- marble
- stone
- granite
- concrete
- metal
- wood
- fibreglass
- vinyl
- glass
How to Step-by-Step
- Apply by brush, roller or airless sprayer
- The surface must be clean and dry before application.
- Soiling and graffiti must be removed.
- Ensure the coating is applied evenly and not too thinly.
- It is recommended to re-paint rendered walls prior to application.
- Non-darkening primer can be applied to maintain the integrity of the surface colour.
- Graffgo is touch dry in 3-4 hours and fully cured with 24 hours of application.
Coverage
Coverage Rate: Usually 8-10 metres is achieved per litre.
Handy Tips
- Clean off equipment with white spirit.
- Should not be applied at temperatures below 5 degrees.
- Remove with soap and water or with a pressure washer at no more than 70 bar.
- To prevent concrete surfaces darkening and application to very porous surfaces, it is advisable to apply a Concrete Sealer.
Safety Precautions
Please use appropriate PPE when using this product (see below)
GRAFFGO IS FOR PROFESSIONAL USE ONLY. NOT TO BE USED FOR ANY OTHER PURPOSE. NOT FOR RESALE. DO NOT MIX WITH ANY OTHER PRODUCT. TRIAL ON A SMALL INCONSPICUOUS AREA PRIOR TO FULL APPLICATION.
USE NEAT – DO NOT DILUTE
ONLY POUR THE REQUIRED AMOUNT INTO A POLYPROPYLENE CONTAINER DO NOT POUR ANY UNUSED PRODUCT BACK into CONTAINER AS IT WILL CONTAMINATE THE REST OF THE PRODUCT
EVERY USER OF THIS PRODUCT SHOULD WEAR SAFETY GOGGLES, GLOVES AND CAREFULLY FREAD ALL APPLICATION AND SAFETY INSTRUCTION BEFORE USING
Ingestion: DO NOT induce vomiting, drink 1-2 glasses of water, seek medical attention
Skin Contact: Wash off immediately with plenty of soap and water, remove contaminated clothing, flush skin with running water. Seek medical attention if irritation or symptoms persist.
Eye Contact: Rinse continuously with water for at least 15 minutes, holding the eyelids open. Seek medical attention. If can be done easily done remove contact lenses.
Spills/leaks: Absorb on inert absorbent and transfer to a container. Prevent spillage from entering natural waters/land drains.
Fire: Use water fog or fine water spray. Emergency workers to wear full protective clothing including breathing apparatus.