Smart Graffiti Shadow Remover

For use on all stone and masonry where shadows are still visible. Graffiti shadows or ghosting can often be left behind after graffiti removal has been carried out, particularly on highly porous surfaces such as sandstone.

Smart Graffiti Shadow Remover will remove this after effect.

Trade / DIY benefits

• Highly active
• Water washable
• contains no chlorinated solvents
• Biodegradable

Trade / DIY applications

• Can be used on all types of stone and masonry.

How to Step-by-Step

1. Apply neat by spray, brush or cloth a generous coating of Smart Shadow remover
2. Leave to dwell for up to 5 minutes – do not allow product to dry out
3. Remove by rinsing off with a pressure washer (hot/steam is best especially in colder weather)
4. Repeat if necessary
5. Give the area one final rinse with an acid-free neutraliser if necessary

Safety Precautions

Use in a well-ventilated area. Avoid contact with skin or eyes. Wear chemical-resistant goggles or visor. Wear rubber (not PVC) gloves and overalls. Splashes to the skin should be washed off with plenty of water. In the event of eye contact, irrigate with clean water. For detailed health and safety information request a hazard datasheet.

SMART SHADOW REMOVER IS FOR PROFESSIONAL USE ONLY. NOT TO BE USED FOR ANY OTHER PURPOSE. NOT FOR RESALE. DO NOT MIX WITH ANY OTHER PRODUCT. TRIAL ON A SMALL INCONSPICUOUS AREA PRIOR TO FULL APPLICATION.

USE NEAT – DO NOT DILUTE – ONLY POUR THE REQUIRED AMOUNT INTO A POLYPROPYLENE

CONTAINER DO NOT POUR ANY UNUSED PRODUCT BACK IN TO CONTAINER AS IT WILL CONTAMINATE THE REST OF THE PRODUCT

EVERY USER OF THIS PRODUCT SHOULD WEAR SAFETY GOGGLES, GLOVES AND CAREFULLY FREAD ALL APPLICATION AND SAFETY INSTRUCTION BEFORE USING

Ingestion: DO NOT induce vomiting, drink 1 – 2 glasses of water, seek medical attention

Skin Contact: Wash off immediately with plenty of soap and water, remove contaminated clothing, flush skin with running water. Seek medical attention if irritation or symptoms persist.

Eye Contact: Rinse continuously with water for at least 15 minutes, holding the eyelids open. Seek medical attention. If can be done easily done remove contact lenses.

Spills/leaks: Absorb on inert absorbent and transfer to a container. Prevent spillage from entering natural waters/land drains.

FIRE: Use water fog or fine water spray. Emergency workers to wear full protective clothing including breathing apparatus.