Everyday liquid graffiti remover. ELITE graffiti remover is an easy to use liquid graffiti remover with deep penetration and fast-acting power which has been specifically formulated for everyday use on common exterior surfaces targeted for graffiti with no damage to the original underlying surface.
The product is designed to remove graffiti from masonry, brick, concrete, stone, mild steel, stainless steel, painted surfaces, and wood surfaces. This product works extremely well on both porous and non-porous surfaces. It can be applied via brush, paint roller or pressurised spray.
Packaged in a 5, 20 or 25 litres this easy to use liquid graffiti remover dramatically reduces the time it takes to remove the graffiti. One application effectively removing 99% of the typical graffiti within minutes, while other products can take multiple applications (and hours of time), which saves end-users significant time and labour.
Users can get 2, 3 even 4 times as many graffiti removal jobs accomplished per shift.
Trade / DIY benefits
- Easy to use
- Works on porous and non-porous surfaces
- Deep penetration
- Does not damage the underlying surface
- Single application – no waiting around
- Removes 99% of the typical graffiti within minutes
- Time and labour saving
- Used neat
Trade / DIY applications
Removes graffiti from…
- masonry
- brick
- concrete
- stone
- mild steel
- stainless steel
- painted surfaces
- wood surfaces
How to Step-by-Step
- Wear the appropriate PPE (see below)
- Pour the required amount in a polypropylene container
- Apply neat by brush, paint roller or pressurised sprayer
- Test on an inconspicuous area prior to full application
- Wash down
What you’ll need
- Appropriate PPE (see below)
- Brush, paint roller or pressurised sprayer
- Hosepipe or bucket for water
Safety Precautions
Use in a well-ventilated area. Avoid contact with skin or eyes. Wear chemical-resistant goggles or visor. Wear rubber (not PVC) gloves and overalls. Splashes to the skin should be washed off with plenty of water. In the event of eye contact, irrigate with clean water. For detailed health and safety information request a hazard datasheet.
FOR PROFESSIONAL USE ONLY. NOT TO BE USED FOR ANY OTHER PURPOSE. DO NOT MIX WITH ANY OTHER PRODUCT. TRIAL ON A SMALL INCONSPICUOUS AREA PRIOR TO FULL APPLICATION.
USE NEAT – DO NOT DILUTE. ONLY POUR THE REQUIRED AMOUNT INTO A POLYPROPYLENE CONTAINER DO NOT POUR ANY UNUSED PRODUCT BACK IN TO CONTAINER AS IT WILL CONTAMINATE THE REST OF THE PRODUCT
WEAR SAFETY GOGGLES, GLOVES AND CAREFULLY READ ALL APPLICATION AND SAFETY INSTRUCTIONS PRIOR TO USE
Ingestion: DO NOT induce vomiting, drink 1-2 glasses of water, seek medical attention
Skin Contact: Wash off immediately with plenty of soap and water, remove contaminated clothing, flush skin with running water. Seek medical attention if irritation or symptoms persist.
Eye Contact: Rinse continuously with water for at least 15 minutes, holding the eyelids open. Seek medical attention. If can be done easily done remove contact lenses.
Spills/leaks: Absorb on inert absorbent and transfer to a container. Prevent spillage from entering natural waters/land drains.
FIRE: Use water fog or fine water spray. Emergency workers to wear full protective clothing including breathing apparatus.