Nexus ProJoint RapidFlow Brush-In Porcelain Paving Grout

The Brush-In Porcelain Paving Grout

If you are looking for a quick and easy solution for filling joints between porcelain paving, then Nexus ProJoint RapidFlow brush-in porcelain paving grout would be the ideal choice. Its simple to use – ProJoint RapidFlow allows an untrained hand to consistently deliver perfect joints every time – precisely formulated for porcelain paving but equally suitable for natural stone paving.

It delivers a weed free, frost resistant joint, without staining the paving – saving you time and money. ProJoint RapidFlow is supplied in two vacuum-packed pouches within the tub.

ProJoint RapidFlow is available in five colours: neutral (buff), light grey, mid grey, basalt and black.

Trade / DIY benefits

• Contractor-sized 12.5kg tubs – product supplied in two bags for easy handling and to minimise waste
• Precisely formulated for Porcelain Paving
• Professional strength and suitable for joint widths of 3mm upwards
• Cement free and non-hazardous
• Suitable for pedestrian traffic: ideal for paths and patios
• Pre-mixed, ready to use and ideal for DIY use
• Also Suitable for natural stone paving
• Easy for the untrained hand to get good results

Trade / DIY applications

• Porcelain paving grout
• Professional strength
• Suitable for joint widths of 3mm upwards
• Suitable for pedestrian traffic
• Ideal for paths and patios
• Suitable for natural stone paving.

How to Step-by-Step

This step-by-step is featured on the video too.

1. Soak the paving area
2. Empty the bag mix evenly on to the surface
3. Work the product in to the joints using a squeegee or a brush
4. Mist down in to the joints
5. Top up low joints and repeat as necessary
6. Remove all excess material by sweeping at 45° angle to the joints
7. A trowel or iron can be used to get a traditional finish
8. Fill the tub with spare product and cover with water
9. Firmly replace the lid to use up to a month later

What you’ll need

1. Squeegee or brush
2. Hosepipe for water

Product sizes

12.5kg

Coverage

Approximate coverage per 12.5kg tub

Joint Size	600 x 600mm slabs	600 x 900mm slabs	600 x 1200mm planks
3 x 20mm	34.8m²	41.8m²	46.5m²
5 x 20mm	20.8m²	25m²	27.8m²
7 x 20mm	14.9m²	17.9²	20m²

Handy Tips

NOTE: as sand is a natural product, some minimal colour variance may occur. As screen colours can vary, the product colours shown above are representative only – for colour selection, cured product samples are available to view at your local stockist.